Panasonic DP-3000 Copier User Manual


 
PRINTOUT JOURNALS AND LISTS
PRINTOUT
JOURNALS AND
LISTS
159
Explanation of contents
(1) Indicates the communication
mode
(2) Start time of communication
(3) End time of communication
(4) File number : 001 to 999 (When the communication is stored into memory, a file number is
assigned for each communication.)
(5) Station number : Sequential number of the Stations.
(6) Communication result : "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that
STOP
was pressed during communication.
"B-OK" indicates that the Batch Transmission was successful.
"M-OK" indicates that the substitute reception message in memory was not
printed.
"P-OK" indicates that memory overflow or original misfeeding occurred while
storing the document(s) into memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Relayed XMT or Confidential Communication was
successful.
"3-digit Info Code" (See page 169) indicates that the communication has failed.
In this case, the machine will print the attached report with first page of your
document as shown on the previous page.
(7) Abbreviated number or
mark :
mark indicates dialled by direct number dial.
(8) Recorded name in One-Touch,
ABBR. or direct dialling number
(9) Number of pages transmitted or
received
: The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
(10) Duration of Communication
Journals and Lists