Panasonic DP-3000 Copier User Manual


 
PROGRAMMING YOUR MACHINE
PROGRAMMING
YOUR MACHINE
33
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST 1 Lighter Setting the home position for the CONTRAST.
4Normal
7Darker
002 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
003 ORIGINAL 1 TEXT Setting the home position for the ORIGINAL.
2 TEXT/PHOTO
3PHOTO
004 STAMP 1 Off Setting the home position of the STAMP.
To select the stamp function when the document is stored in
memory, see Fax Parameter No. 28.
2On
005 MEMORY 1 Off Setting the home position for the MEMORY.
2On
007 HEADER PRINT 1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT 1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME PRINT 1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received document.
2Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
2Soft
3 Medium
4 Loud
012 COMM. JOURNAL 1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. Only: When communication has failed.
2Always
3 Inc. Only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
2Valid
014 FILE ACCEPTANCE
REPORT
1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a report will print after the
document is stored into memory.
2Valid
Customizing Your Machine