Filter
Top Products
Product Description
GN Series Hardware Manual
18
screen may not be aligned with the screen's image or may be unnecessarily small in size. If
you need to access the calibration routine, use a USB mouse.
The touch screen of your GN system is factory calibrated. Run the calibration routine when an
alignment problem exists between the mouse pointer and the stylus contact location on the
screen. You can adjust the touch screen calibration with the software "Hampshire TSHARC
Control Panel".
Depending on the operation system installed, the calibration procedure is slightly different.
3.2.4.1 Calibration under Windows® XP
To calibrate the system under Windows® XP, please proceed as follows:
1.
2.
3.
Procedure
1. Start → Programs → Hampshire TSHARC Control Panel
The following screen will appear:
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net