Filter
Top Products
GN Series Hardware Manual
3.4 Top View
27
3.4 Top View
Mounting clamp
with Allen screw
Mounting clamp
with Allen screw
CF card slot CF card eject button
Top of the GN10/12/15
Mounting clamp
with Allen screw
Mounting clamp
with Allen screw
CF card slot CF card eject button
Top of the GN07
☞
NOTE
• The GN07 system does not have mounting slots on the top.
• When powering up the system, make sure that the air intake and exhaust
openings are not obstructed.
3.4.1 Compact Flash Card Slot
The system is equipped with a compact flash (CF) card slot and only accepts CF cards type I.
☞
NOTE
• Before installing or removing the CF card, the GN unit must be powered
down and disconnected from the power supply.
• The GN10/GN12/GN15 is equipped with an angled metal cover in order to
cover the card slot if no CF card is inserted. If a CF card is inserted, the
cover can be mounted in the "safe-keeping" location. The GN07 does not
have an angled metal cover for the CF card slot.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net