Filter
Top Products
Product Description
GN Series Hardware Manual
38
5. Fasten the system from the rear using the mounting clamps
6. Hook the mounting clamps with screws from the rear side of the panel into
the corresponding pairs of slots of the enclosure
Maximum height for mounting the bracket
6.5mm
The system must be attached firmly with the screws. Tighten the screws with a
torque of 0.5•Nm.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net