Panasonic GT11 Computer Monitor User Manual


 
18 19
Panel cutout dimensions
Panel cutout dimensions
Applicable panel thickness:
1.0 mm to 5.0 mm
( )
( )
45
8
110
72
4
37.7 (Display)
74.5 (Display)
2 (Packing)
66
24
104
9.5
Panel cutout dimensions
Applicable panel thickness:
1.0 mm to 5.0 mm
Applicable panel thickness:
1.0 mm to 5.0 mm
Panel cutout dimensions
150.5
+
1
0
142
5.1
Mounting bracket
39.1 2.6
112
72
40.5 (Display)
100 (Display)
144
66
426
2 (Packing)
429.9
119
+
1
0
139.0
+
1
0
67.0
+
1
0
105.0
+
1
0
67.0
+
1
0
4
When the panel thickness is 5 mm
Mounting panel
4
When the panel thickness is 5 mm
Mounting panel
1
129
7
Applicable panel thickness:
1.0 mm to 5.0 mm
130
+
1
0
103
+
1
0
99 (Display)
102
74.4 (Display)
2 (Packing)
Panel cutout dimensions
Applicable panel thickness:
1.0 mm to 5.0 mm
( )
( )
45
8
110
72
4
37.7 (Display)
74.5 (Display)
66
24
104
9.5
105.0
+
1
0
67.0
+
1
0
2 (Packing)
* The above drawing shows GT32T1. GT32T0 and GT32M do not have an Ethernet port and sound output jack. The display area of GT32M is 116.2 x 87.4 mm.
1
65.0
150.2
163.2
111.9 (Display)
128.8
118.8
84.2 (Display)
Item
Item
User’s memory
Memory capacity
GT01/GT01R
GT01
F-ROM
384 Kbyte
F-ROM
2,048 Kbyte
F-ROM
10,176 Kbyte
Memory
Memory backup
SRAM SRAM
GT11
GT11
F-ROM
1.375 Mbyte
GT32M
GT32M
GT32T
GT32T
Screen data and GTWIN configuration setting data
Clock data, PLC device storage data (24 words max.) and Alarm record data
Memory
Lithium battery (replaceable)
CR2032, commercially available *Not included.
Buy it separately.
Lithium battery (replaceable)
AFPX-BATT *Not included.
Buy it separately.
GT21C
GT21C
F-ROM
6.5 Mbyte
Unit: mm
GT01
GT11
GT21C
GT32M/GT32T
Specifications/Dimensions
Dimensions
GT01R
Specifications
*1. When the unit is being installed in a horizontal orientation or FP programmer II is being connected to the TOOL port, the usable range is 0 to +45°C.
*2. When the unit is being installed in a horizontal orientation, the usable range is 0 to +40°C.
*3. The number of screens that can be registered varies according to the registered contents.
*4. WAV format (PCM, 8-KHz sampling rate, 16 bits, mono), Maximum sound data capacity: 512 KB (approx. 30 sec), Maximum registrable number of sound data items: 128
*5. A USB/RS232C conversion cable should be used to achieve a communication speed of 230,400 bps.
When the TOOL port of GT is set to 230,400 bps, the auto communication setting function of GTWIN cannot be used. Set the communication speed to 230,400 bps on GTWIN before transferring data.
*6. The unit caries out serial communication data processing at 115.2kbits/s.
*7. Communications with external equipment (PLC) are not available.
*8. Simultaneous USB and Ethernet communications are not possible.
Item
Rated voltage
Operating voltage range
Power consumption
Power supply unit isolation method
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration resistance
Shock resistance
Superposed noise
suppression
Environmental
resistance
Mass
DisplayFunctions
Display device
Resolution
Display color
Displayable area
Backlight
Font types
Languages
Graphics
Number of screens
Part functions
Other functions
Contrast adjustment
Automatic commu-
nication settings
Debugging function
Screen creation
Clock function
Touch key resolution
Touch key operation force
Touch key life
Communication
standard
External
communication
conditions
Protocol
Connector
Protocol
Connector
Communication
standard
Communication
conditions with
personal
computers
Screen
data
transfer
interface
Ethernet port
COM.
Port
GT11GT01 / GT01R
GT32M
RS232C
RS422
5V/RS232C
5V/RS422
24V/RS232C
24V/RS422
GT21C
GT32T1GT32T0
RS232C RS422 RS232C RS422 RS232C RS422 RS232C RS422
20 to 85% RH (No dew condensation)
–20 to 60°C
10 to 85% RH (No dew condensation)
10 to 55 Hz (1-minute cycle):
Double amplitude: 0.75 mm, 10 minutes in each of the X, Y, and Z directions
98 m/s
2
min: 4 times in each of the X, Y, and Z directions
1,000 V [P-P] min, pulse width of 50 ns, 1 µs between power supply terminals (by a noise simulator)
*AIGT0030B1/AIGT0030H1: When the ferrite device supplied with our PLC connection cable (AIGT8142) is mounted
IP65 (in the initial stages) Dust-proof and drip-proof from the front of the panel only (Rubber packing is attached to the panel contact surface.)
*When reattaching the panel, replace the waterproof packing.
5 V DC
4.5 to 5.5 V DC
2.4W max.1W max. 1.1W max. 2W max. 10W max. 12W max.
0 to 50°C
24 V DC
21.6 to 26.4 V DC
4.8W max.
0 to 50°C 0 to 50°C*1 0 to 50°C*2
256 colors
STN monochrome LCD
2 colors (blue/white)
TFT color LCD
4,096 colors2 colors (black/white) 2 colors (black/white)
GT01: 3-color LED (green, orange, red)
GT01R: 3-color LED (white, red, pink)
*No need for replacement
3-color LED (green, orange, red)
/White LED
*No need for replacement
240 (W) x 96 (H) dots
96.0 (W) x 38.4 (H) mm
Approx. 230 g
110.8 (W) x 83.6 (H) mm113.2 (W) x 86.4 (H) mm
CFL
[Average life; GT32M: 75,000 hours (25°C), GT32T: 50,000 hours (25°C)]
Approx. 500 g Approx. 470 g Approx. 480 gApprox. 160 g
128 (W) x 64 (H) dots
70.38 (W) x 35.18 (H) mm
Straight lines, continuous straight lines, squares, circles, ovals, arcs, elliptic arcs, fan shapes, elliptic fan shapes, beveled squares, bitmaps
Fixed (GTWIN) : 8 x 8, 16 x 8, and 16 x 16 dots Characters can be displayed in the 1, 2, 4, or 8 times width or height.
TrueType (GTWIN): 10, 12, 14, 16, 24, 26, 28, 32, 36, 48, and 64 Windows (R): 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 32, 36, 48, and 64
Japanese, English, Korean, German, French, Spanish, Italian, Simplified Chinese, Traditional Chinese, Turkish
STN monochrome LCDSTN monochrome LCD
Approx. 330 g
STN color LCD
98.0 (W) x 74.0 (H) mm
White LED backlight
*No need for replacement
320 (W) x 240 (H) dots
Approx. 240 screens (GT32M)*3
Approx. 250 screens*3Approx. 160 screens*3
Recipe, flow display, write device, alarm record, alarm list, and language switching
Provided with a built-in clock function. (Can also refer to and display a PLC clock.) *Buy a commercially available battery.
Sound output *4
Messages, lamps, switches, data, bar graphs, clocks, keyboards, line graphs, and alarm list parts
Messages, lamps, switches, data, bar graphs,
clocks (*), keyboards, and line graphs
Refers to and displays external clock data.
(Not provided with a built-in clock function.)
Recipe, flow display, write device,
and language switching
0.5 N max
USB1.1
USB TYPE-B
0.5 N max
Free layout (8 dots min)
0.8 N max.
The communication conditions of dedicated software and PLC can be automatically set by connecting a cable.
Contrast can be adjusted by using the touch panel. Not adjustable
2000/XP
Our FP series supported/General-purpose serial interface supported/Other companies' PLC supported (Refer to the compatible PLC list for manufacturers and models.)
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS422
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS232C
Conforms
to RS422
Conforms
to RS232C
Tool port (Conforms to RS232C)
1 million operations min
Baud rate: 9,600/19,200/115,200/230,400 bps*5
Data bits: 8 bits
Parity: None, Odd, Even
Stop bits: 1 bit
Data bits: 7 or 8 bits
Parity: None, Odd, Even
Stop bits: 1 bit
Connector terminal base (8 pins)
5-pin mini-DIN
Baud rate: 9,600/19,200/38,400/57,600/115,200 bps
Dedicated software should be used. Applicable OS: Windows® 95 (OSR2 or later)/98/Me/2000/NT/XP
Approx. 180 screens (GT32T)*3
Yes (100BASE-TX, 10BASE-T) *6, *7
Transformer isolation
GT connected between a PC and PLC allows the PLC to be debugged without a direct connection with the PC.
Our dedicated protocol
Base screens: No. 0 to 3FF, Keyboard screens: No. 0 to 7
Screen No.
that can be set
UL/cUL file No.
E96300
UL Standard No.
UL508
Conformance to the UL/cUL standards