Panasonic GT11 Computer Monitor User Manual


 
1716
Options
Connection examples
FPΣ
24V DC
FP0
PLC connection cable
AIGT8142
GT01 5V, RS232C type RS422 24V type
500m max
Mitsubishi Electric FX Series
PLC connection cable
AIGT8152
1. Connection with FPΣ/FP0 2. Distant connection with FPΣ 3. Connection with Mitsubishi Electric FX Series
GT01 5V, RS422 type
FP-X
FPΣ + Communication
cassette (RS485)
PLC Compatibility
Models listed are the models that have been evaluated as of November, 2006.
Company
Series
FP series
FX series
Q series
A series
Model
Mitsubishi
Electric*1
Matsushita
Electric Works
FP-X
FP-
FP-e
FP0
FP2
FP2SH
FX0N
FX1S
FX1N
FX1NC
FX2N
FX2NC
FX3UC
Q00CPU
Q01CPU
Q00JCPU
Q01CPU
Q00HCPU
Q25HCPU
Q12HCPU
Q06HCPU
Q02HCPU
Q02CPU
A1N
A2N
A3N
A1S
A1SJ
A2SH
A1SH
A2CCPU24
C200H
C200HS
C500
C500F
C1000H
C2000
C2000H
C1000HF
C20H
C28H
C40H
C120
C120F
CQM1-CPU42
SRM1-C02
CPM2A
CPM1-20CDR-A
CQM1H-CPU21
CPM2C
CPM2B
C200HX-CPU85-Z
C200HX-CPU64
C200HX-CPU44
C200HE-CPU42
C200HG-CPU63
C200HG-CPU43
C200HE-CPU42-Z
C200HX-CPU64-Z
GT01/GT01R/GT11/GT21/GT32
RS232C
type
RS422 (RS485)
type*
2
Company
Series
Model
RS232C
type
RS422 (RS485)
type*
2
Omron*1
Omron*1
CV500
CV1000
CVM1
CS1H-CPU67
S1H-CPU66
CS1H-CPU65
CS1H-CPU64
CS1H-CPU63
CS1G-CPU45
CS1G-CPU44
CS1G-CPU43
CS1G-CPU42
CJ1H
CJ1M
CJ1G
CP1H
α series
CV series
CJ1 series
CP1 series
CS1 series
C series
F3SP59-7S
F3SP58-6S
F3SP58-6H
F3SP53-4S
F3SP53-4H
F3SP38-6S
F3SP38-6N
F3SP35-5N
F3SP28-3S
F3SP28-3N
F3SP25-2N
F3SP21-0N
KV-10/16/24/40
KV-700
KV-1000
MicroLogix1000
SLC-5/03
SLC-5/04
CPU222
CPU216
CPU215
CPU214
CPU212
80S
200S
300S
1000S
*3
*3
Toshiba
Machine*1
Yokogawa
Electric*1
KEYENCE*1
ALLEN-BRADLEY*1
Models that support
DF protocol
Siemens*1
LG*1
Modbus*1
General-purpose
serial*1
Models that support
RTU protocol
MEW dedicated
protocol
TC mini series
FA-M3 series
KV series
MASTER-K series
MicroLogix series
Models with RS232 port Models with RS485 port
S7-200 series
SLC-5 series
GT01/GT01R/GT11/GT21/GT32
For details about devices and addresses that can be used, please refer to the GT Series Technical
Manual “Connecting and Communicating with the PLCs”. This manual can be downloaded from our site
at http://www.mew.co.jp/ac/e/. (User registration is required before you can download.)
*1. PLCs other than Matsushita Electric Works FP series may be limited in the type of device that can be
used and addresses. Please see manual for details.
*2. Communication may not be possible when using RS485 depending on the sending and receiving
timing with the other device.
*3. We cannot specify what other device you should use; therefore, please test it using the actual
equipment before using.
: Direct connection is possible to the CPU unit of the PLC.
: Connection is possible using the communications unit or a signal conversion cable, etc.
(Example: The QJ71C24N or QJ71C24N-R2 calculator link unit is required when using the Mitsubishi
Q Series.)
: Connection is not possible
Blank: Not evaluated.
GT01/GT01R/GT11 mounting parts
5 sets of mounting parts (4 parts/set)
Package includes one set.
Spare connector
COM. port connectors, 5 connectors in a set
One piece is installed on main unit.
Waterproof packing
Waterproof packing (for replacement), 10 pieces in a set
Package includes one set. One set is installed on main unit.
Options
Panel face protection sheets
10 sheets in a set (option)
GT21C/GT32 mounting parts
5 sets of GT21C/GT32 mounting parts (2 parts/set)
Package includes one set.
GT32 backup battery
*
For GT11 and GT21C, please purchase a commercially
available CR2032 battery.
AIGT080
AIGT080R
AIGT280
AIGT28021
AIG32800
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
GT01
GT01R
GT11
GT21
GT32
AIGT081
AIGT281
AIGT28121
AIG32810
Part No.:
Part No.:
Part No.:
Part No.:
GT01, GT01R
GT11
GT21
GT32
Part No.:
AIGT083
Part No.:
AIGT084
Part No.:
AIGT28321
Part No.:
AFPX-BATT