Filter
Top Products
33
Repacking Instructions
It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or
ship your scanner, please follow these instructions.
≥ Please use the original carton and all of the original packing materials.
≥ Improper repacking of the scanner may result in a service charge to repair the unit.
≥ The scanner should be handled in the correct (horizontal) position.
Materials Required :
≥ Original Scanner Carton & Packing Materials
≥ Shipping Tape and Scissors
1
Disconnect your scanner from the electrical outlet and the interface cable.
2
Fold the plastic part of the exit stopper and put the exit stopper into the exit extension
tray. Slide the exit extension tray into the pre-imprinter door if it is pulled out.
3
Open the pre-imprinter door and tighten the screw.
4
Pack the scanner.
Pre-imprinter door
Screw
≥ CD-ROM 1 piece
Operating Instructions
Driver Software
Power Cord
≥ Installation manual
≥ Maintenance manual
≥ Roller cleaning paper
(3 pieces)
≥ Shading chart
Joint
≥ Blower
USB cable