Filter
Top Products
1. Introduction and Installation
14
1.5.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 10 for accessory information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
Important:
L Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.
1 Open the covers (see steps 1 to 3 on page
12).
2 Remove the used core (1) and used ink film
(2).
3 Remove the stoppers (1) and tags (2) from
the new ink film (3).
4 Insert the ink film and close the covers (see
steps 4 to 7 on page 12).
5 Install the paper tray (page 14), then insert
the recording paper (page 15).
1.6 Handset cord
Connect the handset cord (1).
1.7 Paper tray
Insert the tabs (1) on the paper tray (2) into the
slots on the back of the unit (3).
1
2
2
1
1
3
1
2
3
1
FP141-145AL.book Page 14 Tuesday, October 21, 2003 11:07 AM