Filter
Top Products
19
Operation indicator and warning beep
When scanning documents, check the operation indicator light.
Operation
Indicator
Green light
Slow flash
Green light
Fast flash
Red light
ON
Red light
ON
Light OFF
Light OFF
Warning Beep
No beep
No beep
Green light
ON
No beep
No beep
1 beep
3 beep
No beep
Situation Remedy
The document is being scanned properly.
(Small size letter mode)
To start scanning again,
press .
Move it more slowly.
Move it more slowly.
Delete the contents memorized
in the scanner (see 22 page).
Scan the document as 2 pages or
more.
The document is being scanned properly.
(Normal size letter mode)
The hand scanner is temporarily stopped during
scanning.
You did not move the hand scanner for more than
30 seconds, so it has stopped scanning
automatically.
The hand scanner is being moved quickly.
(The document is being scanned.)
The hand scanner is being moved too quickly.
(Some parts of the document may not be scanned,
or the scanned contents may be too compressed.)
The scanner memory is full.
(Memory indicator green light will flash fast.)
You have scanned a document that is more than
1.5m in length as 1 page.
The scanner is not operated.
Memory indicator
Shows the amount of scanner memory being used.
Memory indicator
(green light)
OFF
ON
Flash slow
Flash fast
Memory used
0%
66%
99%
100%