Filter
Top Products
6
Setup ( Recording paper )
1Open the Control panel by pressing
down the Control panel open button.
2Open the Inner cover by sliding
down the Inner cover open lever.
5Make sure that mark point on the
Release gear is correct, and then close
the Inner cover.
6Close the Control panel and open the
Recording paper cover.
7Fan the stack of paper to prevent a
paper jam, and then insert the paper.
8Throw down the Recording paper cover
and Recording paper arm-spring.
3Prepare the Film cassette.
4Put the Film cassette in the Main unit.
Installing the Plain paper
Control panel
Press down
Inner cover
lnner cover
open lever
Sag
Ink film
Correct the ink film sag
by turning the gear
Turn inside out
Film cassette
Red label
Red gear
Spindles of gears
Bearing
Bearing
Mark on the lnner cover
Mark on the release gear
lnner cover
Click
Recording paper cover
Printed on the back of paper
Recording
paper tray
Recording paper cover
Recording paper arm-spring