Filter
Top Products
7
1Open the Control panel by pressing
down the Control panel open button.
2Open the Inner cover by sliding
down the Inner cover open lever.
3Put the Thermal paper to the Paper
holder by spreading the Paper holder.
4Put the Paper holder in the set position
of the Main unit.
5Insert the Thermal paper to the slit of
Inner cover.
7Close the Control panel
6Make sure that mark point on the
Release gear is correct, and then close
the Inner cover and pull out the Thermal
paper (approx. 5cm) through the outlet
for recording paper.
Installing the Thermal paper
Control panel
Press down
Inner cover
lnner cover
open lever
Paper holder
Correct
Slack
Incorrect
Right sideLeft side
Thermal paper
If the thermal paper has a slack, tighten it by
winding.
Left side
Paper holder
Set position
Right side
Slit
Thermal paper
Outlet
Inner cover
Mark on the lnner cover
Mark on the
release gear
Click