Filter
Top Products
70
• Isn’t the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the
end of product life. It is recommended to replace the
SD memory card.
• Is the camera used under fluorescent lamps operating
at 50 Hz?
By setting the shutter speed to "1/50" or "1/100", flick-
er caused by fluorescent lamps can be diminished.
• Isn’t the "Scan mode" set to "Full scan"?
When the selected scan mode is "Full scan", the
frame rate of the analog output will be 1/4.
Reference
pages
Cause/solution
–
52
23
Symptom
Images cannot be saved on
the SD memory card.
Flicker occurs. (The screen
flickers.)
Images from analog output
are not smoothly displayed.