Filter
Top Products
16
Useful Information
Troubleshooting note #2:
Eliminating interference caused by other appliances
Perform each step until the performance issue is solved.
1. Identify potential electrical noise emitting appliances, and unplug them (if
possible) briefly while you test the adaptor’s network speed.
The following appliances are more likely to produce noise:
• Battery chargers (including cell phone chargers)
• Hair dryers
• Vacuum cleaners
• Lights or lamps which have a dimmer switch or a touch-sensitive on/off
feature
• Power drills
2. If unplugging a device seems to resolve the adaptor’s performance issue,
connect the device to a different wall outlet.
3. If connecting the device to a different wall outlet does not resolve the
performance issue, connect the device to a noise filtering power strip with an
AC cord that is at least 3 m (about 10 ft.) long.
Troubleshooting note #3:
Eliminating interference caused by an adaptor
This product may interfere with the following appliances:
• Short wave radios
• Lights or lamps which have a touch-sensitive on/off feature
• Other PLC adaptors which do not use the HD-PLC standard
Perform each step until the performance issue is solved. If the following steps do
not resolve the issue, refer to the Panasonic PLC Support Site at:
http://panasonic.co.jp/pcc/products/en/plc/ or call our customer call center at
1-800-272-7033.
1. Make sure that the appliance is not plugged into the same wall outlet as an
adaptor.
2. Move the appliance away from any nearby adaptors.
3. Connect the appliance to a power strip.
4. For short wave radios, place the radio near a window.
BL-PA100KTA_OI.book Page 16 Thursday, March 16, 2006 4:17 PM