Filter
Top Products
49
Receiving Faxes
Pager call - when the unit receives a fax!
This feature allows your unit to call your pager when your unit receives a fax document.
1
Press .
Display:
2
Press , then .
3
Press .
4
Rotate to select “ON”.
●
If this feature is not required, select
“OFF”.
5
Press .
6
Enter your pager number up to 30 digits.
Example:
7
Press .
8
Enter your pager access code up to 10
digits if required.
Example:
9
Press .
●
The default code 07734 will show “Hello!”
on your pager.
●
If you want to change this message,
enter your message up to 30 digits.
Example:
10
Press .
●
The unit will dial the stored number.
PAGER TEST
SET
MSG.=5555
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
MODE=ON
JOG DIAL
MODE=OFF
SET
FAX PAGER CALL
7 0
SYSTEM SET UP
MENU
MONITOR
MENU
Display
JOG DIAL
SET
5555
Pager
Your pager will display the message you
entered in step 9. (For example: 5555)
When your pager receives a pager call
11
Check that your pager received
the pager test call.
12
Press .
MONITOR
Note:
●
If
you have subscribed to a Caller ID service,
your pager will display the caller’s telephone
number instead of the message.