Filter
Top Products
24
Volumes
For fax advantage assistance, call 1-800-435-7329.
Adjusting handset volumes!
Ringer volume
4 levels (high/middle/low/off) are available.
While the unit is idle, press or .
●
If any documents are in the document entrance,
you cannot adjust the ringer volume. Confirm
that there are no documents in the entrance.
■
To turn the ringer off:
1. Press repeatedly until the following is
displayed.
Display:
2. Press .
●
To turn the ringer back on, press .
■
While the ringer volume is set to off:
When a call is received, the unit will not ring and
will display the following.
INCOMING CALL
RINGER OFF
SET
RINGER OFF= OK?
YES:SET/NO:STOP
SET
Display
Ringer pattern
●
You can select one of the three ringer patterns.
Change the setting (feature #17 on page 57). The
ringer pattern you selected will sound when the unit
receives a call.
Monitor volume
8 levels (high to low) are available.
While using the monitor, press or
.
Ringer volume
3 levels (high/low/off) are available.
Make sure the TALK indicator is off.
Press .
●
The current ringer will sound.
●
To change the volume, press
again within 5 seconds.
■
To turn the ringer off:
Press and hold until you hear
2 beeps.
●
To turn the ringer back on, press
.
■
While the ringer volume is set to off:
When receiving a call, the handset will not ring,
and the TALK indicator will flash.
LOUD/RINGER
LOUD/RINGER
LOUD/RINGER
LOUD/RINGER
LOUD/RINGER
TALK indicator
Handset receiver volume
3 levels (high/middle/low) are available.
While talking, press .
LOUD/RINGER
Adjusting base unit volumes!