Filter
Top Products
Changing the ring setting in FAX
ONLY mode
To change the number of rings
before the unit answers a call
in FAX ONLY mode.
FAX RING COUNT
RINGS=3 [±]
Features Summary
56
How to set menu options
1. Press .
2. Press or until the desired feature
is displayed.
3. Press or until the desired setting
is displayed.
4. Press .
5. Press .
MENU
SET
MENU
Note:
●
For features #01, #02 and #03, refer to the pages
in the below tables.
●
Step 3 may be slightly different depending on the
feature.
●
See page 55 for more details.
Basic features!
Programming table
Code
#01
Setting the date and time
SET DATE & TIME
PRESS SET
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 17 for details.
See page 18 for details.
See page 20 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
#02
Setting your logo
YOUR LOGO
PRESS SET
(Up to 30
characters)
Feature & Display Settings How the unit operates
#03
Setting your facsimile telephone
number
YOUR FAX NO.
PRESS SET
(Up to 20
digits)
#04
Printing the sending report
To print and check the sending
report for fax transmission results
(p. 36).
SENDING REPORT
MODE=ERROR [±]
ERROR
ON
OFF
(The default setting is in bold type.)
This setting is also available after
activating FAX ONLY mode (p. 45).
If you are using the unit with an
answering machine, set to “5
EXT.TAM” (p. 48).
#06
1, 2, 3, 4,
5 EXT.TAM