Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
System
Features
4.3.2 Camera Setup
Camera Setup window allows you to set up the Network Cameras connected to the
KX-HGW600. Since the network settings such as camera name, port no., and IP
address are automatically configured by the Automatic Setup function, normally you do
not need to set up any further. To change the camera name, follow the steps below.
To configure the network settings of Network Camera manually, follow the steps on
Page 75.
To change the Camera Name
1. Click [Camera Setup] on the Setup Page.
Note
You can jump to the Network Camera screen by clicking [Confirm] in the
Registration/Modification table.
2. Click the entry number of the Network Camera in the Registration/Modification
table.