Filter
Top Products
68
When ET-MD95VM2 (optional) is installed with the projector, select the signaling system according to the
connected device.
Procedure of setting
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The VIDEO SETTING screen will be displayed.
Choose an input signaling system with
the buttons and switch to “LINE
or Y/C” or “YCbCr” with the
buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
If “LINE or Y/C” is selected, choose a
video system with the buttons
and switch to “AUTO1” or “AUTO2”
with the buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
Press the “MENU” button three times.
The on-screen indications disappear and the set
screen appears.
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “VIDEO SETTING” with the
buttons.
•
When buttons are displayed above
or under the items in the “PICTURE” or
“OPTION” screen, they indicate that there
are more adjustment (items).
Note
OPTION
SYSTEM INFORMATION
VIDEO SETTING
FAN CONTROL NORMAL
P IN P ON
FUNC1 P IN P
CONTRAST MODE OFF
PASSWORD
:MENU SELECT
ENTER:SUB MENU
VIDEO SETTING
VIDEO SELECT LINE or Y/C
VIDEO SYSTEM
VIDEO AUTO 1
S VIDEO AUTO 1
AUX (LINE) AUTO 1
AUX (Y/C) AUTO 1
:MENU SELECT
:CHANGE
How to change the signal for the ET-MD95VM2 (optional)