Panasonic PT-AE3000E Projector User Manual


 
ENGLISH - 29
Settings
Menu Navigation
J Displaying the main menu
Press the MENU button to display the main
menu and the operating guidance.
J Adjusting with the bar scale
items
The triangle mark under the bar indicates factory
default setting and the square indicates the current
setting.
J Returning to the previous menu
Press the MENU or RETURN button to return
to the previous menu. Press repeatedly to
escape from the menu mode and return to the
projection.
J Operating procedure
1. Press F G to scroll to the required main menu
item and press the ENTER button to select.
The selected item is highlighted in orange and the
sub-menu is displayed on the right.
See “Main menu and sub-menu” on page 30.
2. Press F G to scroll to the required sub-menu item
and press I H or the ENTER button to adjust.
The selected item is called up and the other menu
items disappear from the screen. The Called up item
will disappear after 5 seconds without any operation
and return to the menu mode.
If there is a lower level, the next level will be
displayed.
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by
pressing I H.
4. Press the MENU or RETURN button to return to
the previous menu.
Navigating through the MENU
ENTER
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOUR
TINT
SHARPNESS
COLOUR TEMPERATURE
DYNAMIC IRIS
WAVEFORM MONITOR
ADVANCED MENU
SPLIT ADJUST
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT
PICTURE
POSITION
LANGUAGE
FUNCTION BUTTON
LENS CONTROL
OPTION
SELECT
NORMAL
ON
OFF
RETURN
Main menu
Sub-menu
Current
settings
Operating guidance
Contains the required buttons to adjust the settings.
BRIGHTNESS
Current setting
Default
PICTURE
POSITION
OPTION
ENTER
SELECT
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
ON
LANGUAGE
RETURN
LENS CONTROL
FUNCTION BUTTON
PICTURE
POSITION
LANGUAGE
OPTION
ENTER
SELECT
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
ON
RETURN
LENS CONTROL
FUNCTION BUTTON
BRIGHTNESS
NOTE:
See “Resetting to the factory default settings” on page 28 to reset each menu item.