Panasonic PT-AX200E Projector User Manual


 
Appendix
Technical Information
48 - ENGLISH
Specifications
Power supply AC 100 - 240 V 50 Hz/60 Hz
Power consumption
290 W
During standby (when fan is stopped): 0.08 W
Amps 3.5 A - 1.5 A
LCD panel
Panel size (diagonal) 0.7 type (17.78 mm)
Aspect ratio 16 : 9
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 921 600 (1 280 x 720) x 3 panels
Lens
Manual zoom (2x)/Manual focus
F 1.9 - 3.1, f 21.7 mm - 43.1 mm
Lamp UHM lamp (220 W)
Luminosity
*1
*1. Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
2 000 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When the ALTITUDE (page 39)
is set to ON: 0 °C - 35 °C (32 °F -
95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*2
(for RGB signal)
*2. See “List of compatible signals” on page 45 for available signals.
Horizontal scanning
frequency
30 kHz - 70 kHz
Vertical scanning
frequency
50 Hz - 87 Hz
Dot clock frequency Less than 150 MHz
COMPONENT (YPBPR) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i
1 125 (1 080)/24p, 1 125 (1 080)/60p, 1 125 (1 080)/50p
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size 40" - 200" (1 016 mm - 5 080 mm)
Throw distance 1.2 m - 12.4 m (3'11" - 40'8")
Screen aspect ratio 16 : 9
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)