Filter
Top Products
47
ENGLISH
Using Web Browser Control
Accessing from the Web browser
Start the web browser on your PC, then
enter the IP address which was set in
the projector.
Enter “user1” in the user name field,
then enter the password in the
password field.
The default setting is “panasonic” (all lower case). If
you have changed the password, enter the new
password here.
The host name set in the projector is displayed in
the “Realm” field.
Click [OK].
The Basic Control page is displayed.
Password change page
Click [Change password].
• Avoid activating two or more Web browser
simultaneously to work out setting or
control actions.
• Change the password first of all.
Note
This projector has networking functions which allow it to be controlled through a web browser on a PC.
The controlled items are:
• Projector’s settings and adjustment
• Projector’s status display
• Transmission of a E-mail message when the projector has a problem
Old password input field
New password input field
New password input field
(re-enter for confirmation)
Button for executing
password change
Button for erasing all
entered characters