Panasonic PT-D5000E Projector User Manual


 
Getting Started
ENGLISH - 16
Setting up
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
Cautions when setting the projectors
When placing the projector in confined space, a ventilation or air conditioning system must be equipped, and keep enough
ventilation space on the rear and both sides of the projector.
Projection method
Setting on a desk/floor and
projecting from front
Mounting on the ceiling and
projecting from front
INSTALLATION: FRONT/FLOOR
COOLING CONDITION: FLOOR SETTING
INSTALLATION: FRONT/CEILING
COOLING CONDITION: CEILING SETTING
Setting on a desk/floor and
projecting from rear
Mounting on the ceiling and
projecting from rear
INSTALLATION: REAR/FLOOR
COOLING CONDITION: FLOOR SETTING
INSTALLATION: REAR/CEILING
COOLING CONDITION: CEILING SETTING
NOTE:
A translucent screen is required for rear projection.
See more detailed setting up instructions, INSTALLATION and COOLING CONDITION in PROJECTOR SETUP menu on the functional
instructions in the CD that is provided with the projector.
Do not place or use a projector on top of another projector.
NOTE:
Do not stack the projectors without using frame or shelf.
Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause
damage or injury.
Avoid heating or cooling air of the air conditioning systems directly blow on to the projector ventilation
openings.
You can tilt the projector within ± 15 degrees horizontally.
STANDBY(RED)/
ON(GREEN)
LAMP TEMP
FILTER
STANDBY(RED)/
ON(GREEN)
LAMP TEMP
FILTER
over 50 cm (20") over 50 cm (20") over 50 cm (20")
over 10 cm (4")