Panasonic PT-D5000E Projector User Manual


 
Basic Operation
Remote control operation
ENGLISH - 22
You can use the remote control to switch
the signals that are being input and
projected.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is
available that allows the user to hide images temporarily.
Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.
Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.
Press the ON SCREEN button again to displays
You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the
ASPECT button is pressed.
Appearance sample
S-VIDEO signal
VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO
The projector has 7 types of internal test patterns to check the condition of the set.
1. Display an input signal image.
2. Press the TEST PATTERN button.
3. Press I H to select the required test pattern.
Switching the input signal
RGB1 Switches to RGB 1 IN.
RGB2 Switches to RGB 2 IN.
DVI-D Switches to DVI-D IN.
VIDEO Switches to VIDEO IN.
S-VIDEO Switches to S-VIDEO IN.
SDI
*1
*1. SDI is only for PT-DZ6710E.
Switches to SDI IN.
Stopping the projection
Clearing the on-screen menu
Changing the picture aspect ratio
NOTE:
The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is
in the provided CD-ROM.
Displaying the internal test pattern
NOTE:
See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM.