Filter
Top Products
Getting Started
Setting up
ENGLISH - 18
Connecting
1. Make sure the shape of the mains plug and the AC IN
terminal on the back of the projector match, then push
the plug all the way in.
2. Align the side of the “power cord secure lock” with the
side guide rail of the AC IN terminal of the projector and
slide it in.
3. Place the latch to the latch catcher and press until it
clicks.
4. Connect the mains lead to a mains socket.
Disconnecting
1. Unplug the mains lead from the mains socket.
2. Depress the latch and slide the cover off.
3. Slide the “power cord secure lock” up along the side
guide rail and remove.
4. Hold the plug and unplug the mains lead from the AC IN
terminal on the back of the projector.
Power indicator lights in orange if the internal cooling fan is
still operating by internal power supply.
Mains lead
Rail guide
Latch
Latch
Rail guide
NOTE:
• Do not use other than the provided mains lead.
• Ensure all the input devices are connected and turned off before connecting the mains lead.
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start
the projection.