Panasonic PT-D5700EL Projector User Manual


 
21
ENGLISH
Example of connecting with PCs
RGB 2 IN
VD
SYNC/HD
B/P
B
G/Y
R
R/P
SERIAL
REMOTE 1
REMOTE 2 IN
IN
OUT
LAN
DVI-D IN
RGB 1 IN
VIDEO IN
S-VIDEO IN
IN OUT
RGB 2 IN
VD
SYNC/HD
B/P
B
G/Y
R
R/P
SERIAL
REMOTE 1
REMOTE 2 IN
IN
OUT
LAN
DVI-D IN
RGB 1 IN
VIDEO IN
S-VIDEO IN
IN OUT
DVI-D Cable (available in the market)
PC with
DVI-D terminal
PC
PC
Control PC
Note
For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
page 61.
If your PC has the resume feature (last memory), the computer may not function properly until the
resume capability is disabled.
When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD
terminals.
The EDID settings may be needed depending on the equipment connected when DVI-D signals
are input. (Refer to page 35.)
Example of connecting with AV products
RGB 2 IN
VD
SYNC/HD
B/P
B
G/Y
R
R/P
SERIAL
REMOTE 1
REMOTE 2 IN
IN
OUT
LAN
DVI-D IN
RGB 1 IN
VIDEO IN
S-VIDEO IN
IN OUT
DVD player Video deck
DVD player
Digital Hi-vision video deck
with DVI/HDMI terminal
Digital Hi-vision video deck
Control PC
DVI-D Cable or HDMI-DVI
conversion cable
(available in the market)
D-Sub 9-pin straight cable
Red (Connect PR)
Blue (Connect P
B)
Green(Connect Y)
When connecting with a video deck, be sure to use the one with a built-in time base corrector
(TBC) or use a TBC between the projector and the video deck.
If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect
a TBC between the projector and the video deck.
The EDID settings may be needed depending on the equipment connected when DVI-D signals
are input. (Refer to page 35.)
Attention