Filter
Top Products
18
Other operations for connection
“Glossary” (See page 44)
The newly registered connection is added to the connection list in the window shown in step 1.
Click [ADD] and enter the IP address (including its periods) of the
connection to be added, and then click [REGISTER].
2
Click [Designate] at the <Select Access Port> window.
The window shown to the right appears.
1
When [Network] is set to [U] and the desired projector is not displayed at the <Select Access Port> window, connections can be
added and deleted by the following operations.
Adding a connection
When a projector with the [ ] mark is selected, the window shown to the right appears. Enter the
password and click [OK]. (See page 32)
Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
• Clicking [CANCEL] on the password input window displays [ ] in the menu bar (see page 21), without establishing a
connection.
• When an incorrect password is entered, an error message appears.
Click [OK] to return to the password entry window and enter the correct password again.
Operations when password entry is required for connection
Adding and deleting connections