Filter
Top Products
29
Select [WIRELESS LAN] at the network menu.
1
Select the number to be connected with the [ ] buttons.
2
PT-FW100NT
RETURN
SELECT
ENTER
LANGUAGE
OPTION
SECURITY
NETWORK
POSITION
PICTURE
USER1
OFF
ON
WIRED LAN
WIRELESS LAN
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
NETWORK STANDBY
WEB CONTROL
LIVE MODE CUT IN
STATUS
INITIALIZE
OFF
OFF
Changing the network number
Network setting of the projector (cont.)
If you selected one of [USER1] to [USER3] for [WIRELESS LAN] at the network menu, you can make detailed network settings.
Confirm to your system administrator before changing any settings.
[User] settings
How to display IP address setting menu
Press [WIRELESS LAN]ĺ[USER1]-[USER3]ĺ[ENTER] at the network menu.
DHCP :
ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF : If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS
], [SUBNETMASK ] and [GATEWAY ].
“Glossary” (See page 44)
IP address settings
WIRELESS DETAILED SETUP
NEXT CANCEL
RETURN
SELECT
ENTER
DHCP
IP ADDRESS
SUBNETMASK
GATEWAY
192.168. 11.100
OFF
192.168. 11. 1
255.255.255. 0
NAME CHANGE
USER1 1/3
USER1
A wired LAN and wireless LAN cannot be used in the same segment.
Selecting [DISABLE] disables the wireless LAN.