Filter
Top Products
31
Network setting of the projector (cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
When setting [OPEN] or [SHARED] as authentication and setting [WEP ] as the encryption method:
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit
string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the
hexadecimal format).
When setting [WPA-PSK ] as authentication : Set key and select [OK].
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
“Glossary” (See page 45)
Important video/audio data is protected because AES encryption processing takes place in advance for all network numbers,
even if [ENCRYPTION] is set to [NONE].
“Glossary” (See page 45)
WIRELESS DETAILED SETUP
OK CANCELRETURN
RETURN
SELECT
KEY1
KEY2
KEY3
KEY4
DEFAULT KEY
1
3/3USER1
The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.
SSID : Panasonic Projector
DHCP : OFF
IP ADDRESS : 192.168.11.100
SUBNETMASK : 255.255.255.0
GATEWAY : 192.168.11.1
MODE : AD HOC
AUTHENTICATION : OPEN
ENCRYPTION : NONE
Default settings of [USER1]-[USER3]