Settings
PICTURE menu
ENGLISH - 34
You can adjust the white balance of the projected image.
LOW More bluish
DEFAULT Balanced white
HIGH More reddish
You can keep the projected image bright and vivid even
in well-lit rooms where the ambient light sources cannot
be controlled, such as when a door opens or when
window coverings fail to block out sunlight.
AUTO: Automatic adjustment
ON: Active
OFF: Deactive
You can improve the vertical resolution of a 2-2 or 2-3
pulldown movie. Press I H to select the required
setting. (Not available with NETWORK signals)
OFF Deactive
ON Active
You can switch the automatic noise reduction system on/
off. Press I H to select the required setting.
ON: Automatic noise reduction
OFF: No noise reduction
When the video signal is changed, the setting switches
automatically. You can switch the setting manually to
match the video data. Press I H to cycle through the
options. (Available with S-VIDEO/VIDEO only)
The projector will detect the signal from the COMPUTER
terminals if the signal is RGB or YP
BPR. You can turn off
the automatic detecting system and switch between
RGB and YP
BPR manually.
AUTO: Automatic detecting system
RGB: Project as RGB signal
YPBPR: Project as YPBPR signal
COLOR TEMPERATURE
DAYLIGHT VIEW
NOTE:
• Do not cover the Ambient Luminance Sensor (ALS) of
the projector. See “Ambient Luminance Sensor (ALS)”
on page 12.
• AUTO is not available when INSTALLATION setting in
OPTION menu is set to REAR/DESK or
REAR/CEILING.
DIGITAL CINEMA REALITY
NOTE:
• Available with 480i, 576i, 1 080/60i and 1 080/50i only.
NOISE REDUCTION
NOTE:
• Applying noise reduction may affect image quality.
TV-SYSTEM
AUTO
FG FG
NTSC
SECAM
FG FG
NTSC 4.43
PAL-N
FG FG
PAL
IH PAL-M
NOTE:
• AUTO setting will select from NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM.
RGB/YPBPR
NOTE:
• Available with VGA60, 480i, 576i, 480p, 576p,
1 080/60i, 1 080/50i, 720/60p, 720/50p, 1 080/60p,
1 080/50p only.
• When the input signal is not selected correctly with
AUTO setting, select RGB or YP
BPR manually.