Panasonic PT-F300NTU Projector User Manual


 
Appendix
Technical Information
ENGLISH - 58
Specifications
Power supply
AC 100 - 240 V 50 Hz/60 Hz
Power consumption
350 W
During standby (when fan is stopped): Approx. 4 W
*1
*1. When NETWORK STANDBY in NETWORK menu is ON: Approx. 25 W
When IN STANDBY MODE of AUDIO SETTING in PROJECTOR SETUP menu is ON: Approx. 35 W
The maximum power consumption during standby: Approx. 35 W.
Amps
4.1 A - 1.5 A
LCD panel
Panel size (diagonal)
0.78 type
Aspect ratio
4 : 3
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
786 432 (1 024 x 768) x 3 panels
Lens
Manual zoom (2x)/Manual focus
F 1.7 - 2.6, f 24.8 mm - 48.8 mm
Lamp
UHM lamp (250 W)
Luminosity
*2
*2. Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
4 000 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When the HIGH ALTITUDE MODE
(page 42) is set to ON: 0 °C - 35 °C
(32 °F - 95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*3
(for RGB signal)
*3. See “List of compatible signals” on page 52 for available signals.
Horizontal scanning
frequency
15 kHz - 91 kHz
Vertical scanning
frequency
50 Hz - 85 Hz
Dot clock frequency
Less than 150 MHz
COMPONENT (YPBPR) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i, 1 125 (1 080)/60p,
1 125 (1 080)/50p
Color system
7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size
33" - 300" (838.2 mm - 7 620 mm)
Throw distance
1.2 m - 19.7 m (4'0" - 64'7")
Screen aspect ratio
4 : 3
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING (Menu
selection method)
Speaker
1 piece (Monaural) 4 cm (Round)
Max. useable volume output
5.0 W