Panasonic PT-LW25HU Projector User Manual


 
About Your Projector
ENGLISH -
19
Preparation
Rear terminals
(1) VIDEO IN
Connect to VIDEO input signals.
(2) COMPUTER AUDIO IN
Connect to the audio input signals.
(3) COMPUTER 1 IN/ COMPONENT IN/S-VIDEO IN
Connect to COMPUTER IN 1/ COMPONENT IN/
S-VIDEO IN input signals.
(4) COMPUTER 2 IN/
MONITOR OUT
Connect to COMPUTER IN 2/
MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(5) LAN
Connect to a LAN cable for network connection.
(6) SERIAL IN
Connect to a computer via an RS-232C cable.
(7) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(8) AUDIO IN
Connect to the audio input signals.
AUDIO IN has right and left (L and R) terminals.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
(3) <AUTO SETUP> Button
Execute the setting of Auto setup in the [setting]
menu.
(4) < > Button
Turn the projector on/off.
(5) <STANDBY(R)/ON(G)> indicator
Indicate the power status.
(6) <MENU> Button
Display the MENU screen. (
Æ
page 36)
(7) <LAMP> indicator
Light yellow when the projection lamp reaches
its end of life.
(8) <WARNING> indicator
Indicate the abnormal conditions of the projector.
(1)(3)
(4)
(5)
(6)
(7)
(2)
LAN
COMPUTER 2 IN
COMPUTER 1 IN /
COMPONENT IN
COMPUTER
AUDIO IN
VIDEO IN
R
L
S-VIDEO IN
AUDIO IN
SERIAL IN
Control panel
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) <SELECT> Button
Execute the selected item.
(2) ▲▼◄► (VOL -/+) Buttons
Navigate the MENU screen.
(8)