Panasonic PT-LW25HU Projector User Manual


 
Information
ENGLISH -
59
Settings
Information
Select [Information] from the Main Menu (see
“Navigating through the menu” on page 36),
then select the item from the sub-menu.
Remote Control
Control Panel
Input Source Information
Display
The [Information] Menu is used for checking the
status of the image signal being projected and the
operation of the projector.
You can also Press the <INFO.> button on the remote
control to display the [Information] menu.
Input
J
The selected [input source] is displayed.
System
J
The selected system is displayed.
H-sync freq.
J
The selected [H-sync freq.] is displayed.
The horizontal frequency of the input signal is
displayed in KHz, or - - - KHz when no signal.
V-sync freq.
J
The selected [V-sync freq.] is displayed.
The vertical frequency of the input signal is displayed
in Hz, or - - - Hz when no signal. Numbers of Hz
doubles when during Interlace.
Screen
J
The selected Screen size is displayed.
Language
J
The selected language is displayed.
Lamp power
J
The selected lamp mode is displayed.
Lamp runtime
J
The cumulative lamp operating time is displayed.
Power management
J
[Off ], [ Ready] or [Shut down], and [Timer] are
displayed.
Key lock
J
The selected Key lock icon is displayed.
PIN code lock
J
[Off ], [On 1] or [On 2] is displayed.
Remote control
J
The selected remote control code is displayed.
Serial number
J
The serial number of the projector is displayed.
The serial number is used to service the projector.