Filter
Top Products
Preparation
About Your Projector
ENGLISH - 14
Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram
indicated inside.
Top view
(page 23)
Attaching a hand
strap
You can attach a favorite strap on
to the remote control.
Remote control
POWER button
Switch between stand-by
mode and projection mode.
(page 19/page 20)
INPUT SELECT buttons
Switch the required input
signal button to select.
See CD-ROM contents the
WIRELESS button.
See CD-ROM contents for
the PAGE buttons
Display the main menu.
(page 27)
Navigate through the
menus with FGIH, and
activate the menu item with
ENTER button. (page 27)
Reset some of the settings to
the factory default settings.
(page 24)
Turn off the projection
temporarily. (page 24)
See CD-ROM contents
the MULTI-LIVE button.
Control to adjust the
volume of the speaker.
(page 25)
Return to the previous menu.
(page 27)
Capture the projected image
as a frozen picture. (page 24)
Detect the input signal and the
setting of POSITION, DOT
CLOCK and CLOCK PHASE
in POSITION menu will be
adjusted automatically for
COMPUTER signals. (page 23)
See CD-ROM contents the
COMPUTER SEARCH
button.
Control to change the
scale by means of digital
zoom. (page 26)
Assign a useful function for
shortcut. (page 25)
Display the frozen image
while the display of
subsequent images
continues. (page 25)
Remote control signal
emitters
NOTE:
• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• See “Remote control operation” on page 23.