Filter
Top Products
Basic Operation
Remote control operation
ENGLISH - 25
You can project an image split in 2 windows
as an INDEX-WINDOW. One is frozen and
stored in memory, and displayed on the
screen’s left side while displaying subsequent image
continues on the right.
Press the MENU or RETURN button to escape.
Q Switching the position
In default, the frozen image is displayed on the left
and the subsequent image is displayed on the
right. Press IH to switch the position.
Q Changing the image size
Press F G to capture a new image and change
the size in 2 ways.
Q Capturing a new image
While in INDEX-WINDOW mode, press the
ENTER button to capture a new image and the
frozen image window will be updated in a moment.
You can assign a selected function to the
FUNCTION button.
Following functions are assignable. See
“FUNCTION BUTTON” on page 37 for assigning
procedure.
You can control the volume of the built-in
speakers and output audio sound. Press “+”
side of the VOLUME button to increase and
“-” to decrease.
Projecting an image in INDEX-WINDOW mode
Projected image
Frozen image
Continuing image
Frozen image
Continuing image
Continuing image
Frozen image
NOTE:
• If you change the window size, the aspect ratio of the
image is changed and becomes vertically elongated.
NOTE:
• When capturing a quick moving picture, perform
several times to get a stabled picture.
Frozen image
Continuing image
Using an assigned function
AV MUTE
See “Stopping the projection
temporary” on page 24.
FREEZE
See “Capturing an image” on
page 24.
AUTO SETUP
See “Setting up the image
position automatically” on
page 23.
INDEX-WINDOW
See “Projecting an image in
INDEX-WINDOW mode” on
page 25.
ASPECT See “ASPECT” on page 33.
PICTURE MODE
See “PICTURE MODE” on
page 30.
WIDE MODE See “WIDE MODE” on page 35.
CLOSED CAPTION
SETTING
See “CLOSED CAPTION
SETTING” on page 37.
Controlling the volume of the speaker