Filter
Top Products
Basic Operation
Switching the projector on/off
ENGLISH - 19
Before switching on the projector, make sure the power cord and all the other devices are connected correctly.
See “Connections” on page 17 and “Power cord” on page 18.
Q By control panel operation
Make sure CONTROL PANEL in OPTION menu is
set to VALID. The POWER button is locked to
prevent malfunction and the POWER LOCK
indicator lights in red.
1. Press the RELEASE button.
The POWER LOCK indicator goes off.
Without any operation in 10 seconds, the
POWER button will be locked again.
2. Press the POWER button in 10 seconds.
The POWER button beeps once.
3. The POWER indicator flashes in green several
times.
4. The POWER indicator lights in green and displays
the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set
to OFF, the startup logo will not be displayed. See
“STARTUP LOGO” on page 35.
Q By remote control operation
1. Press the POWER button.
2. The POWER indicator flashes in green several
times.
3. The POWER indicator lights in green and displays
the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set
to OFF, the startup logo will not be displayed. See
“STARTUP LOGO” on page 35.
Q By direct power on function
You can switch on the projector by connecting the
power cord. See “Direct power on function” on
page 18.
Switching on the projector
FUNCTION
MENU
RETURN
INPUT SELECT
RELEASE
RELEASE
1
1
(2 - 3)
(1)
NOTE:
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and will not affect the performance of the projector.
• When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound
depends on the external temperature.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• Operating the control panel buttons with covered hand, such as plastered or gloved, may result in fail.