Filter
Top Products
12
Shutting Down
1 Display the shut down screen.
After saving important data and closing each application, select [Turn Off Com-
puter] from [start].
2 Confirm shut down.
Select [OK] after selecting [Turn Off].
3 When [Windows is shutting down] is displayed, select [OK].
Your computer and the wireless display will power off automatically.
1 Turn on your computer. ( Operating Instructions of the computer)
2 <When using the CF-07 series computer>
After confirming the “DISPLAY
READY” indicator has lit, turn
on the wireless display.
<When using a laptop other than the
CF-07 series computer>
After has been displayed on
the taskbar, turn on the wire-
less display.
Press the power switch and hold it down for approximately three seconds until the
power indicator turns on before releasing it.
3 Select your application.
Power
Switch
Power
Indicator
NOTE
When your computer and the wireless display do not power off using the above
procedure, “PC in standby” may be displayed though the computer is not in standby
mode.
In this case, select [OK]. The wireless display will power off automatically.
Starting Up/Shutting Down