Panasonic CF-VDW07CRFM Scanner User Manual


 
23
Set the high temperature mode func-
tion to [Normal temperature] or
[High temperature].
When using the wireless display in a
high-temperature environment, be
sure to set the wireless display in the
high-temperature mode.
Battery Menu
By selecting [Battery], the battery status will be displayed.
General Wireless Battery Option Version
100% Excellent
OK
Cancel
Run the refresh battery.
When the confirmation message is
displayed, select [Yes].
Once the battery indicator turns green,
the battery pack will be completely
discharged, the wireless display will
power off automatically, and then
charging will commence. It takes ap-
proximately 2 hours until the power
automatically goes off through the
complete discharge of the battery from
the fully charged state.
Allow the battery pack to charge un-
til the battery indicator turns green.
(While charging, the backlight is
turned off automatically.)
NOTE
The battery will not be refreshed correctly in the following cases.
When the power of the wireless display is cut.
When the electric power becomes disconnected (e.g., electrical outage, acci-
dental removal of the AC adaptor, etc.).
(This screen is a sample.)
Status : Full Charge
Voltage : 8154mV
Current : 0mA
Temperature : 26.2 °C (79.2 °F)
Remain : 100%
Error : None
Refresh Battery : Execute
Environment : Normal temperature