Filter
Top Products
17
PCSearch
Setting
Current setting [Single] - [1-4/U]
Select access port
Standby Live Mode
Update
Close Connect Connectability
All
n <Projector Search> Window – [1-4/U] (See page 19)
A Setting menu display
Choose to display or hide the
B to F buttons
B Access Devices (See pages 34, 40, 42)
When only one projector is connected, select [
]. When
multiple projectors are connected, select [ ].
※ Multiple projectors [(Multiple projectors icon)] are
available when “1-4/U” is selected.
C S-MAP (See page 18)
Display <Projector Search> window – [S-MAP].
D 1-4/U (See page 19)
Display <Projector Search> window – [1-4/U].
E PC Search (See page 20)
Display <PC Search> window.
F Other search (See page 29)
From the projectors that are currently switched on, search
for the projector of specified IP address, domain name,
and ID. (From all network numbers except for [U (user)])
G Update the connection status display
H “Network” number
If you specify [1], [2], [3], [4], [U (user)]
※1
or [Display all],
the projector(s) assigned with the corresponding network
number(s) will be displayed in [Projector name] field (See
page 53). The default value is [S-MAP]
※2
for both PC and
projector.
I This mark appears for the projectors that have been
searched and found through wired LAN.
J ID (See page 29)
Display projector’s ID.
K Mode (See page 34)
Display projector’s mode or style.
L Available modes and functions
Unavailable modes/functions among [Live mode
] and
[Multi live mode ] are displayed with [ ] overlaid on
them.
M The number of people connected to this projector
Display the number of people that are connected to this
projector.
N The status of this projector
Display the projector’s connection status.
O [ ] will be displayed when password is required for
the connection. (See page 29)
P Connection message
Blinks when connection is not possible. Click to display
information on resolving the issue. (See page 22)
Q
The [Projector Name] of the selected projector and the
name given in the favorites are displayed (See page 49).
Guides for the operating status and connection method
etc are also displayed.
R Connectability
The name and ID of projectors are displayed on the upper
left of the selected projector’s projection screen.
Once it is confirmed as connectable, the message
“Projector is available.” will appear on the PC screen.
S Connection
Connect to the selected projector.
Connecting with wireless LAN (cont.)
H
M
N
L
O
S
K
J
Selected
projector
P
Q
R
B C D E F G
Current settings
A
※1
• In the following situations, connections other than [U (user)] are not possible.
- Not logged in with Administrator authority
• Depending on the computer and wireless LAN adapter used, Easy Wireless Set Up may not be possible. If this is the case,
the [Network] number of <Projector Search> window automatically switches to [U (user)]. For details of the connection
procedure, first close Wireless Manager ME 5.5, and then refer to pages 25 - 27.
※2
• The network number is [S-MAP], when Wireless Manager ME 5.5 starts. These numbers must match for the connection. To
check the network number, refer to the network menu of the projector.
• When importance is placed on security, select the network number [2] - [4], because WEP (wireless communication
encryption)
※
is set on these network numbers.
• If [U (user)] is used for the network number, important video/audio data is protected because AES
※
encryption processing
takes place in advance for all network numbers, even though [ENCRYPTION] is set to [NONE].
• Other network adapters may not be usable under Easy Wireless Set Up connections.
• Connections to other networks connected through the wireless LAN adapter are broken under Easy Wireless Set Up connections.
※ “Glossary” (See page 71)
I