Filter
Top Products
Make sure that the battery is installed
with the correct polarity as indicated on
the battery holder. Incorrectly installed
batteries may burst or leak, resulting in
injuries.
Batteries that seem worn down or
damaged should not be used. Using
worn down or damaged batteries may
result in leaking.
Do not charge, short, heat, break or
throw in a fire, as it may result in the
battery leaking, generating heat, or
bursting.
When disposing of the battery, cover the
battery contacts with insulation (ex.
tape). Direct contact with other batteries
may result in leaking, fire, or explosion.
Do not solder the battery, as it may result
in the battery leaking, generating heat, or
bursting.
CAUTION
Power
When the unit is not used over an
extended period of time, switch it off and
unplug it. If an unused unit is left
connected to a power source for a long
period, degraded insulation may cause
electric shock, current leakage, or fire.
The unit should be used only with the
power cord enclosed with the unit.
Installation and Relocation
Do not position the unit in a location
where it is unstable.
Do not place the unit in a hot humid or
dusty environment. Prolonged exposure
to these adverse conditions may cause
fire or electric shock.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord
attached, it can cause damage to the
cord which could result in fire or electric
shock.
Move this unit with two persons.
Otherwise, this unit may fall down and
cause injury.
10 Operating Instructions (For Basic Operations)
For Your Safety