Filter
Top Products
Connecting External Devices
1. Connect the external device to the elite Panaboard using a USB cable (sold separately).
• elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard’s USB port.
External device: Plug the B connector (smaller connector) into a USB port on the external device.
USB Cable
(Sold Separately)
To USB Port
Flatbed
Scanner
MFP
To USB Port
About the Usage Location
• Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/
cooling vent or exposed to strong winds.
• Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme
changes in temperature.
Note
• The elite Panaboard may not work properly when used in one of the above locations.
20 Operating Instructions (For Basic Operations)
Usage