Filter
Top Products
Assembling the elite Panaboard
For Wall Mounting
1. Loosely wrap the power cord with the cable tie,
and plug the power cord into the AC inlet.
• Connect the power cord to the elite Panaboard
before installing on a wall.
Power Cord
1
2
2. Insert the end of the cable tie into the cable tie
fastening hole behind the control-power
cover-back.
3. Pull the loose end of the cable tie to tighten it,
and install the power cord depending on the
location of the outlet, as illustrated in the
following diagrams.
• When attaching the power cord downward.
Fasten the power cord
with the cable tie.
• When attaching the power cord along the lower
side of the elite Panaboard.
Fasten the power
cord with the cable tie.
52 Operating Instructions (For Basic Operations)
Installation Manual