Filter
Top Products
110
RESTARTING THE ENCODER / DECODER
It is possible to restart the encoder/decoder using the CGI commands.
■ Format
● Restarting the encoder
● Restarting the decoder
■ Response
■ Important Notice
The user name and the password authentication will be required when trying to restart the encoder/decoder. Enter a
user name with access level 1 (ADMINISTRATOR) and the password registered to the encoder/decoder to be restarted.
■ Example
• Restarting the decoder
http://192.168.0.11/cgi-bin/decoder.cgi?com=netvup&submit=RESTART
HTTP /1.1 200 OK
CR
LF
Cache-Control: no-cache
CR
LF
Content-Type: text/plain
CR
LF
Content-Length: XX
CR
LF
(XX: Display the octet number of the Message-Body decimally)
CR
LF
http://(IP address of the decoder)/cgi-bin/decoder.cgi?com=netvup&submit=RESTART
http://(IP address of the encoder)/cgi-bin/encoder.cgi?com=netvup&submit=RESTART
HOW TO USE THE CGI COMMANDS