Filter
Top Products
42
■ CONTROL/STATE page (page 43)
Destination IP address and destination port number
of each of the VIDEO IN connectors streaming video
and audio data to be sent
Starting and stopping to encode video and audio
data
■ VIDEO page (for each video input channel)
(page 44)
Camera No.
Camera title
Destination IP address
Destination port number
Source port number
Bit rate of streaming video and audio data
TOS BIT
TTL
Starting up the encoder automatically
Camera cable compensation
Dynamic range
Watermark
GOP
■ AUDIO page (page 46)
ON/OFF for sending audio data
■ ALARM page (page 47)
Action when a contact alarm occurs (Set details on
the ALARM-DRY CONTACT page) (page 48)
Action when a camera site alarm occurs (Set details
on the ALARM-CAMERA SITE ALARM page) (page
50)
Action when a video loss occurs (Set details on the
ALARM-VIDEO LOSS ALARM page) (page 52)
IP address to be notified of alarms
Port number to be notified of alarms
■ RS-485 DATA PORT page (page 54)
RS-485 data port setup
Network port setup
■ NETWORK page (page 56)
IP address of the encoder
Subnet mask
Default gateway
DNS server (IP address)
MAC address (only for confirmation)
Transmission speed
■ SYSTEM page (page 57)
System mode
Video and audio encryption
NTP (Network Time Protocol)
Time and date
Device information
Main CPU mode setup
Note: The main CPU mode is the advanced function
for integrated control.
■ USER page (page 59)
ON/OFF for user authentication
User registration
User deletion
■ HOST page (page 60)
ON/OFF for host authentication
Host registration
Host deletion
■ MAINTENANCE page (page 61)
Camera control (only to confirm angle of view)
Firmware update
Restarting the encoder
Exclusive command authentication setup
List of the Items on the Settings Pages of the Encoder
SETTINGS MENUS OF THE ENCODERSETTINGS MENUS OF THE ENCODER