Filter
Top Products
36
SETUP
The "Network" window appears.
Note: If the "TCP/IP" item is not displayed, refer to the operating
instructions of the OS and follow the procedures to install the
TCP/IP.
The "TCP/IP Properties" window appears.
3. Click the [Configuration] tab.
4. Click to select the TCP/IP protocol of the
currently used network card.
5. Click the [Properties] button.
6. Click the [IP Address] tab.
7. Click the "Specify an IP address" radio
button.
8. Enter the IP address and the subnet mask
as follows.
• IP Address: 192.168.0.9
• Subnet Mask: 255.255.255.0
9. Click the [OK] button, and the window
closes.
10. Restart the PC to make the IP address valid.