Filter
Top Products
51
CGI RESET
Resets the alarm using the CGI commands.
Refer to "RESETTING THE ALARM/DISPLAYING
THE ALARM STATUS" of the "HOW TO USE THE
CGI COMMANDS" section on page 102.
TIMER
The timer starts when the alarm is detected. When
the entered time for this setting has passed, the
alarm will be reset automatically. Select the time
(seconds) from the following.
1 - 60 (a second step), 90, 120, 150, 180, 240, 300 -
3 600 (60 seconds interval)
Notes:
•When an alarm with the same alarm type and
number is detected and the timer is activated, the
timer resumes from the set value.
• When alarms are detected successively, the
encoder is controlled by each alarm.
The default setting is "TIMER" and the timer is set to
"10" (seconds) for all ports.