Filter
Top Products
8
OPERATING PROCEDURES
■ Power Up
Before operating the monitor, confirm that the cameras and
peripherals are connected correctly and securely.
1. Turn on the monitor by pressing the POWER button.
The Power Indicator lights in green.
2. Select the desired input to be displayed by pressing
the INPUT SELECT button.
Pressing this button will select the display input in the
sequence shown below.
The selected input picture appears on the monitor
screen.
VIDEO IN A VIDEO IN B
■ Display Setting
The Display Setting can be made onscreen as shown
below.
1. Press the MENU button.
The menu shown below appears on the monitor screen.
It will close automatically if no operation takes place
within about 10 seconds.
2. Move the cursor to the LANGUAGE parameter in the
menu with the C or D button, then select the desired
language with the - or + button.
Pressing the button will toggle the display language as
shown below.
3. Move the cursor to the BRIGHT, CONTRAST, SHARP-
NESS, COLOR, TINT parameter with the C or D but-
ton, then adjust the level of the selected item with the
- or + button.
While the level of an item is being adjusted, the indica-
tor displays the changed level as shown below.
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR 0
TINT 0
AFC SHORT
CH DISPLAY OFF
STANDBY ON MODE 1
LANGUAGE ENGLISH
NORMAL SETTINGS
ENGLISH FRANÇAIS
+
-
ESPAÑOL
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR 0
TINT 0
Darker Brighter
Less More
Soft
Sharp
Less More
Reddish
Greenish
Item Effect Indicator
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
Onscreen Display Video Input Audio Input
A CH VIDEO IN A
B CH VIDEO IN B
AUDIO IN