Filter
Top Products
INTRODUCTION & SAFE OPERATION
4
Congratulations on your purchase of the PANTHER LS8 Hand-Held Thermal
Transfer Printer. The versatile PANTHER LS8 is designed to meet the
demanding printing requirements of electrical and network users. The LS8
prints high quality industrial labels on a wide variety of materials for electrical
and network applications, such as wire/cable, components, safety, and facility
identification. It is the ideal labeling tool for electricians, installers,
maintenance personnel, and contractors. As you will read throughout this
operator’s manual, the PANTHER LS8 has been designed with many time
saving features that will allow you to maximize your labeling productivity.
This manual will guide you step by step through the set-up, operation, and
troubleshooting of the PANTHER LS8 Hand-held Thermal Transfer Printer. If
you have problems not covered herein, contact your local Panduit Sales
Representative, call Panduit Technical Support at 866-871-4571, or call
Panduit Customer Service at 800-777-3300. More information is also
available on the web at www.panduit.com.
SAFE OPERATION PRACTICES
The following general safety practices supplement the specific warnings and
cautions depicted elsewhere in this manual. They are recommended
precautions that must be understood and applied during the operation and
maintenance of this printer.
Do Not Operate In An Explosive Environment
Do not operate the printer in the presence of flammable gases or fumes.
Operation of this printer in such an environment constitutes a definite safety
hazard.
Do Not Operate In Wet Or Damp Areas
Do not operate this printer in wet or damp areas. Operation of the printer in
such an environment constitutes a definite safety hazard.