Filter
Top Products
1740 SHDSL 2/4-Wire Router User’s Guide
CHAPTER 3 Quick Installation
This section describes how to manage the router via the Web browser from the remote end. The Web
page is best read with a display resolution of 1024 x 768. To change the resolution, go to the Microsoft
Windows Control Panel and click on the Display icon. You will find the display settings there.
3.1.1 Login
STEP 1: Configure your workstation to the same network segment as the router, if for example the router
is set to its default address of 192.168.1.1, we could set the PC to 192.168.1.133 and subnet
mask 255.255.255.0.
STEP 2:
Start your Internet browser.
STEP 3:
Enter the IP address of the router in the Web address field. For example, if the IP address is
192.168.1.1, enter http:// 192.168.1.1
STEP 4: You will be prompted to enter your user name and password. Type your password, or if the
password was not changed, type the default passwords. The default ADMINISTRATOR user
name and password are root.
1740-A2-GB20-00 July 2004 11