Filter
Top Products
H. Asynchronous Terminal Operation
3160-A2-GB21-90 February 2001
H-15
Configuration Worksheets for the Asynchronous Terminal Interface
This section contains one set of blank worksheets to be used when configuring
your DSU/CSU using the async terminal interface. In the tables,
default settings
for Default Factory 1 are indicated by
bold
type. It is recommended that you copy
these blank worksheets before using them.
Network Interface
Options Front Panel Equivalent Value (
Default in
Bold)
Line Framing Format NET Framing D4,
ESF
Line Coding Format NET Coding AMI,
B8ZS
Line Build Out (LBO) LBO
0.0
, –7.5, –15, –22.5
Management Link Mgmt Link Enable,
Disable
Bit Stuffing BitStuff
62411
, Part68, Disable
Network Initiated LLB NET LLB
Enable
, Disable
Network Initiated PLB NET PLB
Enable
, Disable
ANSI Performance Report
Messages
ANSI PRM Enable,
Disable
Circuit Identifier Circuit Ident
Text Field
, Clear
DTE Interface Options Front Panel Equivalent Value (
Default in
Bold)
Interface Status DTE Port
Enable
, Disable
Line Framing Format DTE Framing D4,
ESF
Line Coding Format DTE Coding AMI,
B8ZS
Line Equalization Equal
0
–
133
, 133–266, 266–399,
399–533, 533–655
DTE LB on External
Contact
Extrn DLB Enable,
Disable
Send All Ones on DTE
Failure
Send Ones
Enable
, Disable